IMPORTANT : Before transporting this vehicle;

• Turn fuel valve to OFF position.
• Turn gas cap vent to OFF position.
• Open carburator dram valve, drain carburator bowl, close drain valve.
• Remove battery and keep in upright position.

Description of vehicles to which this table applies: HONDA CT 70

VEHICLE STOPPING DISTANCE

This figure indicates braking performance that can be met or exceeded by the vehicles to which it applies, without locking the wheels under different conditions of loading.

The information presented represents results obtainableby skilled drivers under controlled road and vehicle conditions. and the information may not be correct under other conditions.

CONSUMER INFORMATION

This figure indicates passing times and distances that can be met or exceeded by the vehicles to which it applies, in the situations diagrammed on th next page.

The low-speed pass assumcs an initial speed of 20 MPH and a limiting speed of 35 MPH. The high-speed pass assumes an initial speed of 50 MPH and a limiting speed of 80 MPH.

NOTICE: The information presented represents results obtainable by skilled drivers under controlled road and vehicle conditions, and the information may not be correct under other conditions.

Description of vehicles to which this table applies: HONDA CT-70

SUMMARY TABLE:

Low-speed pass...... 441 Feet; 10. 4 Seconds
High-speed pass ..... Not Capable

ACCELERATION AND PASSING ABILITY

It is with great pleasure that we welcome you as a new owner of a Honda motorcycle. Further, we wish to thank you for selecting a Honda product.

This unique miniature Trail Bike is specially designed so that it can be easily carried in an automobile, light airplane, boat, etc. It is not designed, equipped, or approved for operation on public highways or roads.

This Owner's Manual is a guide for the proper operation and servicing of your motorcycle. Read it thoroughly so that you will be able to maintain your motorcycle in the best of condition for the utmost in riding pleasure.

Your Honda dealer is fully equipped to handle your service needs and, furthermore, he is always happy to provide assistance if needed.

We wish you many miles of safe and pleasant trail riding.

1

FOREWORD

CONTENTS

2

SERIAL NUMBER LOCATION NOMENCLATURE OPERATING INSTRUCTIONS

• INSTRUMENT I\ND INDICATOR LAMP
• ELECTRICAL CONTROLS
• MECHANICAL CONTROLS
• FUEl AND OIL
• CARRYING THE MOTORCYCLE
• PREPARATION FOR RIDING
• STARTING ENGINE

• RIDING THE MOTORCYCLE MAINTENANCE

• SERVICE SCHEDULE

• MAINTENANCE OPERATIONS TOOL KIT

TECHNICAL DATA

WIRING DIAGRAM

3
4
8
8
9

12
16
19
20
21
23
25
25
26
52
55
59

SERIAL NUMBER LOCATION

The frame serial number (1) is stamped on the left side at the frame center and the engine serial number (2) is located on the crankcase directly abov the step bar attaching point.

Further, the frame serial number must be indicated when processing the warranty claim and for ordering spare parts.

3

NOMENCLATURE

4

1. Speedometer
2. Front brake lever
3. Throttle grip
4. Horn button

5. Rear brake pedal
6. Foot rests

7. Rear brake lever

8. Headlight beam control switch
9. Steering handle bar knob

10. Gear change pedal

11. Tail/stop light

5

6